Double Suspension Set for ADSS
Double Suspension Set for ADSS is mainly used for large height difference, span more than 800 meters or unilateral overhang angle is 30 º -36 º line tower connection
Pictures and illustrations:

1.Structural Reinforcing Rods 2.Dead-end Component 3.AGS Clamp 4.PS-link 5.Yoke Plate 6.U-Clevis

Model Specification (Span ＞800m):
Name	Available Dia. of Cable(mm)	Length of Dead-end Component (mm)	Length of Reinforcing Rods(mm)	Reference Weight (kg)	Universal Scheme
					Link	AGS Clamp	Link Fittings
ZC-AXY 0940 300	8.6-9.4	1500	1060	1.2	L-1040	AGS-4	U-10
ZC-AXS 0940	8.6-9.4	1900	1600	1.7	L-1040	AGS-4	U-10
ZC-AXS 1010	9.5-10.1	1900	1600	1.8	L-1040	AGS-4	U-10
ZC-AXS 1070	10.2-10.7	1900	1600	1.9	L-1040	AGS-4	U-10
ZC-AXS 1140	10.8-11.4	1900	1600	1.9	L-1040	AGS-4	U-10
ZC-AXS 1220	11.5-12.2	2000	1700	2.2	L-1040	AGS-4	U-10
ZC-AXS 1290	12.3-12.9	2000	1800	2.3	L-1040	AGS-5	U-10
ZC-AXS 1370	13.0-13.7	2000	1800	3.4	L-1040	AGS-5	U-10
ZC-AXS 1460	13.8-14.6	2000	1800	3.6	L-1040	AGS-5	U-10
ZC-AXS 1550	14.7-15.5	2200	1900	4	L-1040	AGS-5	U-10
ZC-AXS 1650	15.6-16.5	2200	1900	4.2	L-1040	AGS-6	U-10
ZC-AXS 1750	16.6-17.5	2400	2000	4.4	L-1040	AGS-6	U-10
ZC-AXS 1870	17.6-18.7	2400	2000	4.7	L-1040	AGS-6	U-10

Note: 1. The maximum unilateral suspension angle of single suspension clamp is 20 ° - 30 °.
2.The above configuration is conventional configuration. If special configuration is required, consult the technical department of the company.

Inquiry Cart 0