Single Suspension for OPGW
Suspension Set for OPGW used primarily for straight-sided drop tower, or less than 15 º line tower connection. Clamp screw from the inside and outside the two pre-twisted wire, hanging head and supporting the composition of connecting fittings. Clamp grip strength is greater than the tensile strength of fiber optic cable rated 10% -20%, for the transfer axial loads, and distributed radial compressive stress, better protection of fiber optic cable, to avoid the phenomenon of bending stresses and stress concentration. Suspension Set for OPGW with the Suspension has excellent fatigue resistance, the power cable can also play a supporting role in damping.
Pictures and illustrations:

1. Structural Reinforcing Rods 2.Dead-end Component 3.AGS Clamp 4.EyeChainLink(TypeZH) 5.U-Clevis 6.Grounding Clamps

Model Specification:
Model	Available Dia. of Cable(mm)	Length of Structural Reinforcing Rods (mm)	Length of Outer Rods	Reference Weight (kg)	Universal Scheme
					AGS Clamp	Link Fittings
ZC-AXY 0940 300	8.6-9.4	1500	1060	1.2	L-1040	AGS-4	U-10
ZC-OXY 0940	8.9-9.4	1400	1000	0.88	AGS-5	ZH-7	U-7
ZC-OXY 1010	9.5-10.1	1690	1140	1.38	AGS-5	ZH-7	U-7
ZC-OXY 1070	10.2-10.7	1690	1140	1.48	AGS-5	ZH-7	U-7
ZC-OXY 1140	10.8-11.4	1760	1180	1.55	AGS-5	ZH-7	U-7
ZC-OXY 1220	11.5-12.2	1840	1240	1.73	AGS-5	ZH-7	U-7
ZC-OXY 1290	12.3-12.9	1960	1320	1.84	AGS-5	ZH-7	U-7
ZC-OXY 1370	13.0-13.7	1960	1320	2.74	AGS-5	ZH-7	U-7
ZC-OXY 1460	13.8-14.6	2000	1360	2.99	AGS-6	ZH-7	U-7
ZC-OXY 1550	14.7-15.5	2120	1440	3.38	AGS-6	ZH-7	U-7
ZC-OXY 1650	15.6-16.5	2120	1440	3.59	AGS-6	ZH-7	U-7
ZC-OXY 1750	16.6-17.5	2400	1620	4.07	AGS-6	ZH-7	U-7
ZC-OXY 1870	17.6-18.7	2400	1620	4.31	AGS-6	ZH-7	U-7

Note: 1. The maximum single side suspension angle of single suspension clamp is 15 ° - 18 °. 2.The above configuration is a general configuration. Please refer to the appendix for other connection hardware and special instructions. 3.If you have special needs, you can consult our technology department.

Inquiry Cart 0